Header photo (detail) courtesy Michael Eudenbach

Tuesday, June 7, 2011

Molds and Jigs


Workshop volunteer Paul Connors feeding the planer





Rocking the Boat participants unloading the goodies from Phily




Molds and one of the bending jigs unloaded at Rocking the Boat's
Brooklyn workshop.




A jig for bending the stem.




Jig and steambox




These two photos are of the frame bending jig. A smaller version has been built for the knees.
Notice that
next to the jig is a steambox setup. The pieces will be steamed to make them pliable before going onto the jig.


All photos courtesy Gina Pickton/Workshop on the Water

Boatbuilding glossary found at Inthe Boatshed, courtesy Gavin Atkin



Gina & Co. have been busy at the boatshop as the project heats up, with help from the CHAD group. Her report:

"We’ve been making some progress on both getting boats out of the shop, and moving forward on the whaleboat. One boat left last week and two more will be out the door next week. Then we will finally have the room freed up in the shop for the whaleboat.
On Friday we delivered some goodies to Rocking the Boat. They now have the keel pattern, the knee and frame bending jig patterns, the stem bending jig, the strongback and 8 molds. We’ve also made our own stem bending jig and are on our way to completing our own knee and frame bending jigs."

Once the strongback is set up and the molds attached, the fun should begin in earnest.

Sunday, May 22, 2011


Clamp being filed




Clamp being filed





Clamp being sanded





Jeff and Nicholas admiring a students work



all photos courtesy Gina Picton

From my esteemed correspondent Gina Picton comes this brief summary of the weeks progress on the whaleboats:

"The CHAD students were in again this week. They are working on the frame bending jig. I’ve attached some pictures of them working with teacher Jeff Gerstemeier (in the hat) and workshop volunteer and instructor Nicholas Pagan. The jig has many built in clamps to hold each frame in place and the students are learning to use the different tools needed to complete the project. They have 29 ready to go, with just a few more to finish."

Gina says a couple more boats will leave the boatshop this week, allowing work to begin on setting up the support structure need for building the whaleboat. There is a possibility of some names to apply to the student photos above and also some photos they've taken of the work as well! Stay tuned.

Thursday, May 19, 2011

the Whaleboat


Artwork from the logbook of the ship Iris while on its voyage from 1843-1847. The painting depicts a sperm whale upending one of the whaleboats chasing it.

Courtesy Girl on a Whaleship




This detailed painting of the killing of a whale by a whaleboat crew was done on the inside cover of a logbook. The logbook covers two voyages; the ship Alexander Barclay, 1837-1840 and Charles W. Morgan, 1841-1842.

Courtesy Girl on a Whaleship






Diagram ({{Information |Description={{en|1=Side and interior plan of whale-boat equipped with apparatus of capture, &c. Noted on the drawing as Plate 192. sec 5 v ii pp241, 252. not clear why the file name says fig 193.}} |Source=NOAA Photolibrary Image ID: figb01)

Courtesy NOAA





Azorean whaleboat racing


C0urtesy Azorean Whaleboats







The Queen's Ranger's whaleboat after its trip from Crown Point to Fort Ticonderoga
(courtesy David Michlovitz)

Courtesy Fort Ticonderoga Brigade




The past--a district Missionary's whaleboat

In early days the work of the "Southern Cross" was supplemented by the district missionaries in their whaleboats, but in recent year these have been replaced by launches and schooners

Courtesy Anglican History Oceania 1849-1949







from 'Into the Deep', a documentary by Ric Burns
The history of the American whaling industry from its 17th-century origins in drift and shore whaling off the coast of New England and Cape Cod, through the golden age of deep ocean whaling, and on to its demise in the decades following the American Civil War.
Find here, and here.

I just happened to catch the airing of this documentary on PBS, I rarely watch TV so it was extremely fortuitous. I was deeply moved and impressed by this work.
Ric Burns is without doubt a most discerning and articulate documentry filmaker. I recommend this film highly. It focuses acutely on the wreck of the Essex, an American whaleship and more generally on American whaling. The wreck of the Essex is reputed to be one of the inspirations for Moby Dick, and the documentary focuses quite a bit on Melville's celebrated work. Do not miss this!

Courtesy Ric Burns, PBS, and Mystic Seaport





Aquatic Mammals
Caption: Darting Harpoon into Sperm Whale
Image Date 1926
Subject Whaleboats
Whaling
Harpoons
Sperm whale
Image Source Author Cook, John A.
Image Source Title Pursuing the Whale : a Quarter-Century of Whaling in the Arctic
Pub. Info. Boston, MA : Houghton Mifflin Company, 1926
Page No./Plate No. Facing page 8
Digital collection Freshwater and Marine Image Bank
Repository Most materials are located in the University of Washington Libraries. Images were scanned by staff of the UW Fisheries-Oceanography Library
Copyright Materials in the Freshwater and Marine Image Bank are in the public domain. No copyright permissions are needed. Acknowledgement of the Freshwater and Marine Image Bank as a source for borrowed images is requested.
Ordering Information The University of Washington Libraries does not provide reproductions of this image. This record contains a citation for this image. If you want to use the scanned image, acknowledgement of the Freshwater and Marine Image Bank as a source for borrowed images is requested.
Type Image

Courtesy
University of Washington Libraries






A whaleboat chasing its prey

Courtesy Girl on a Whaleship




From the introduction to ' The Whaleboat A study of Design, Construction and Use from 1850 to 1970 by Willits D. Ansel, published by the Mystic Seaport Museum:

The term "whaleboat" properly describes boats used for hunting whales, lthough it has also been applied to other boats having similar features, generally sharp ends. Whaleboats ere used by the thousands aboard American whaleships in the middle of the nineteenth century and, in lesser numbers, aboard the vessels of toher nations and at shore stations around the world. The whaleboat was a double ended, light, open boat with a length at that time of between twenty-seven and thirty-one feet and a beam of slightly more than one-fifth the length. It was pulled by oars and sailed. It was a fine sea boat, not only adapted to its function but also handsome. Though there were variations in size, lines, and construction, the general characteristics were well defined.
The whaleboat was once the most widespread of all small craft. In the late 1800s it was known in the Pacific in such widely separated places as Easter Island, Tasmania, the Bonin Islands and the Aleutians. In the Atlantic, it appeared in the north off Greenland, in the Azores, the Grenadines, and south to Tristan da Cunha and still farther south to Antarctica. In the Indian Ocean it was seen in the Mozambique Channel, Kerguelen Island and Cocos. It was used in the Arctic Ocean at Herschel Island on one side and Spitsbergen on the other. Whaleboats were seen in the most remote places in the sea.
The last voyage of a whaleship that carried whaleboats was in the 1920s. At a few far scattered places the boats continued to be used for shore whaling, as at Tong and Norfolk Island in the Pacific and at Bequia and the Portuguese Islands in the Atlantic. Two whaleboats are still maintained at Bequia and whaling on Pico and Madeira.* In 1969 there was whaling at Fiji. Elsewhere on remote islands the type survived for carrying cargo and passengers.
In the United States, where the whaleboat was carried to its final stage of development and where the boats were build by the thousands, very few remain outside of museums, although an undermined number survive in Alaska.
Much has been written in praise of whaleboats:
Their shape "ensures great swiftness as well as qualities of an excellent seaboat." 1
The boats were dry and rode "as gracefully as an albatross...for lightness and form, for carrying capacity compared with its weight and sea-going qualities, for speed andfacility of movement at the word of command, for theplacing of menat the best advantage in the exercise of their power, by the nicest adaptation of the varying length of the oar to its position in the boat, and lastly, for a simpicity of construction which renders repairs practicable on ships, the whaleboat is simply as perfect as the combined skill" of generations of boatbuilders could make it. 2

As surf boats the whaleboats were "without rival, better than a lifeboat which is a compromise because it has to carry a larger number of people...The whaleboat was the best seaboat that man could devise with no limits to size, weight, or model. "3 A whaleboat type, locally called a longboat, was adapted on Tristan da Cunha around 1886, after fifteen men were lost in a lifeboat. The longboat coxswains conider their light, canvas covered boats fine surf boats. 4
Howard Chapelle cites the whaleboat's reputation for good performance under oars and sail under all conditions.5 Others noted their maneuverability and speed and, last but not least, the cheapness of their construction.
Such praise was deserved. However, the whaleboat was the product of compromises, and was excelled in some functions by specialized boats. There were faster pulling boats, such a certain ones used in nineteenth-century smuggling in southern England, and certainly some lifesaving boats were safer in surf or a breaking sea. In terms of all-around performance, however, the whaleboat rated very high.

1. Charles M. Scammon, The Maritime Mammels of the Northewest coast of North America and the Whale Fishery, rev. ed. (Riverside: Manessier Publishing Co., 1969), p.224.

2. William Davis, Nimrods of the Sea, rev. ed. (North Quincy: The Christopher Publishing House, 1972), pp157-58.

3. Clifford W. Ashley, The Yankee Whaler, (Garden City: Halcyon House, 1942), p.59.

4. Notes on the Tristan da Cunha boats were provided by the island's administrator, J. I. H. Fleming, in 1973.

5. Howard I. Chapelle, The National Watercraft Collection, (Washington, D.C., Government Printing Office. 1960), p. 262

* Whaling was banned in the Azores in either 1986 or 1987, even though other small groups of shore based whaling, such as the Inuit and the Bequian whalers were allowed to continue as their whaling is considered 'indigenous'. It's my belief that the Azoreans should also be allowed to take whales based on their long standing practice. (ed.)

While not meant to condone the wholesale industrial slaughter of whales by, in particular, Japan and Norway, I do feel the history and development of the whaleboat a legitimate area of inquiry.

Currently I am writing a weblog about the construction of two whaleboats being built to fit out the restoration of the Charles W Morgan underway at Mystic Seaport. The boats are being built to historic standards at both the Independence Seaport Museum's boatshop in Philadelphia, PA and at Rocking the Boat in Brooklyn, NY.

Monday, May 16, 2011

Molds completed!


One of the lofting boards in the workshop




Two mold halves about to be joined by Gina





I asked Gina how the lines on the lofting board were transferred to the pieces of wood used to build the molds. She asked if I knew of the nailhead technique. I did not, so she showed me how it works. Nails, like the ones in thi photo, are pounded in at regular intervals along the lofted line of the drawing, the the wood for the frame piece is aligned and gently impressed with the curvature of the drawing. You can see the nailhead indentations in the board.




Tools of the trade



Gina Pickton explaining some of the vagaries of the lofting/mold building process to me.




Lots of work to finish up and boats to be moved before the building of a whaleboat can take place. This will hopefully all be accomplished this week. Next a structure will be built in about the area occupied by the blue lift to attach and stabilize the boat skeleton, the molds, keel, stem and sternpost on a 'strongback' or table/platform as these boats are built upright, Norwegian style and not upside down which is the more common practice.


All Photos courtesy Snez'a Litinovic





Last Sunday, (meaning March 8) I met a new friend for the first time. We'd been conversing by email and since she lives in Philadelphia I thought we could combine a visit to the Independence seaport museum with a visit to the workshop to update the progress on the whaleboats. Snez'a had never seen the museum and we had a lot of fun viewing and discussing the collection. Snez'a is an architect (her firm, 119 Degrees Architects) so a lot of what she was seeing in terms of process and drawings and form made sense to her, and led to lively discussion. I had left my camera behind but fortunately Snez'a had a little battery time left on her camera and was able to get some photos. Gina Pickton was finishing up the mold building for the whaleboat project and was very gracious in showing us how the process worked and answering our questions.




Molds finished and stored awaiting the building of support structure and strongback




Same with these, one set for Philly and one for NYC




One half of the frame building jig being built by the school team from CHAD school in Philadelphia



ditto


photos courtesy Gina Pickton





Gina finished up the molds for both boats this week and was kind enough to send some photos along with a brief update on the progress.

"This week we finished up both sets of molds. Now we’re taking a moment to finish up the Elco’s Tranquility and Bear Cub, and the Marsh Cat to clear space before we continue on.
The pictures above are of both sets of Whaleboat molds ( for this workshop and the one in NYC at Rocking the boat, ed.), stored out of the way until needed

On Wed we have some regular kids from the CHAD school here in Philadelphia. They are working on jigs for the whaleboat.The lobster trap looking thing is the frame bending jig the kids are working on. We’ll get pictures of them working on it next week."


Once the project is properly underway, Gina will be sending me regular updates and I will attempt to visit as often as possible as well to document the build in Philadelphia, with project director Geoff McKonley updating me from NY.
Stay tuned.

Saturday, April 30, 2011

Building Molds for the Whaleboats Project


Here we see molds 1 and 2 labeled RtB




Gina here is joining a two piece half mold




and here




Mold # 1 for the ISM boat. These are long and narrow boats. 28' feet long and as Gina measured from the lofting board today, just under 6' beam. They are quick, maneuverable and responsive, and will have gaff rigs.




Mold parts awaiting assembly




More of that (those)




And yet more




Gina Pickton assembling parts into a complete mold




Laying them down onto the lofted lines to check for accuracy




putting it together




You can't really see it, but Gina has in hand a small template for drawing, then cutting, a keel rabbet before joining the mold halves




Keel rabbet




This is a model whaleboat from the museums collection, dusted off and installed in the visitors
section of the workshop so folks can see what the finished boats will look like. Gina says this little exhibit has been very successful.





Amistad, Gina worked aboard Amistad in 2007

courtesy Gina Pickton





Crewing aboard Gazela

courtesy Gina Pickton






Replanking schooner Dolphin

courtesy Gina Pickton



All photos Thomas Armstrong, unless otherwise attributed




Willets Ansel, author of The Whaleboat, defines molds as: 'Temporary forms used in whaleboat construction , around which the boat is planked'. Apparently the term is so ubiquitous I found no other definition in about two hours of searching the internet and boatbuilding texts including Chapelle. So let me attempt to expand on Willets' definition. Molds are built to conform to the inside form of a boat drawing, taken in regular vertical sections and serve as a framework around which the actual boat is built. Most common practice today in traditional construction of small boats have the molds set upside down and the boat is only turned right side up after planking is finished. The whaleboats are built right side up, like Norwegian small boats and most larger boats and ships.
The lines of a boat are drawn full size and laid down on a lofting board. The molds are cut to conform to these lines. Once built, the molds are secured to a 'strongback' or support frame or 'table' to allow the building of the boat.

I visited the boatshop today to see what progress had been made on the building of the molds for the two whaleboats. I found Gina Pickton, an employee of the workshop, busy putting together precut peices of the molds. The mold halves are joined after cutting rabbets for the keel to fit into. After they are joined more rabbets will be cut for battens or ribbands, horizontal strips running the length of the boat to tie the molds together. With molds and ribbands in place and the keel laid, all is secured to the strongback and planking can commence. These boats are unusual as the garboard, (gar·board/ˈgärˌbôrd/
Noun: The first range of planks or plates laid on a ship's bottom next to the keel.) and the next strake (1st strake) and the top two strakes (gunwale and sheer strake) are built lapstrake, while all other planking is carvel.
Gina and co. are building two sets of molds, one for the ISM boat and one for Rocking the Boat in NY.
When I visited, Gina was quite accommodating, answering my questions and allowing me to document her work. She also showed me a portion of a 6 hour (3)DVD set from Mystic Seaport which follows the construction of a whaleboat there. The team at WoW are using this as a guide to sequence their build and to answer many of the questions that come up along the way.

A quick note about Gina Pickton. She has been an employee of the boatshop for about 1.5 yrs. and has been involved with boats for over a decade, mostly larger boats, tall ships. All the work she has done prior to the whaleboat project has been repair/reconstruction maintenance type work. She allowed that she is very excited to participate in a ground up new build project.

Monday, April 25, 2011

Molds

Whaleboat molds were cut from the lofted plan last week. Two sets were made; one to send up to Rocking the Boat in NYC. The students there will be building a boat with Geoff Mc. while his cohort Tony A. is rowing another one of the boats built by the students to Maine and back as a fund raiser for the program.

The other set of molds will be erected at the Workshop on the Water. They will form the shape of things to come. Really they will shape the form of the whaleboat.

We will be following up soon with more on the molds and their setup, hopefully, watch this space. (ed)

Monday, March 21, 2011

Whaleboat Models





Beetle Whaleboat

Photo 1—Port side view: This was a Beetle whaleboat, so-called as they were built by Charles Beetle, a whaleboat builder from New Bedford, Massachusetts; in fact, the name “Beetle” was burned into two places on the completed boats. This model was built to a scale where 1/2-inch represents one foot and was the subject of a two-part series of articles published in Seaways Journal of Maritime History. The model was based on the last boat Beetle built. On completion, it was shipped to the Mariners' Museum where it can still be seen today.

Photo 2—Midships and a look at the gear: The gear aboard a whaleboat was highly specialized and included not just harpoons used to fasten to a whale and the lances that were used to kill the creature, but also the line tubs. In this case the tubs were built with individual staves, as were the baling scoop and the fresh water keg. The harpoons and lance tips, the boat knife and hatchet head were made from nickel silver, oxidized to a soft patina representing age, and the edges were then polished to simulate having been recently sharpened.

Photo 3—Interior detail: Whaleboats were ceiled inside, meaning that they were planked inside and outside the frames. This model is also an example of a painted model as opposed to being polished Boxwood. At the right-hand end of the last photo of the interior of the boat the compass can be seen, required for situations where a boat lost sight of its parent ship. The compass in this model boat was gimbaled as were the real ones. There are paddles in the bottom of the boat used when quietly approaching a whale on the surface. All of the equipment has been aged to represent usage.


While this model was built to be displayed on a regular base and mounted on posts, Roger decided to see what it would look like set up on a simulated beach. This was done in his basement, on a piece of cardboard with a layer of sand scattered on it and two different coloured backdrops.

The model is fourteen inches long.

photos and text courtesy
The Internet Craftsmanship Museum









From 1720 to 1920 nearly 60,000 whaleboats were consumed by the American whaling industry. With a useful life of no more than three years, whaleboats were discarded on the spot throughout the coastal U.S. and around the world. Remarkably, only a dozen or two have survived to become part of today's museum collections.

In 1916, the Dartmouth Historical Society commissioned the building of a half sized model of the bark LAGODA. Local whaleboat builder Joshua Delano was retained to build the seven half-sized model whaleboats needed for the project. Delano built these models according to the design of the full-sized boats he had built for the whaling industry for more than forty years.

Whaling historian Erik A.R. Ronnberg, Jr. made a thorough study of Delano’s half-sized boats in order to produce this kit of a uniquely American working craft.

photos and text courtesy Historic Ships






Whalers had no equal in handling an open boat at sea. At a time when whales were still plentiful as well as fair game, they were hunted in relatively small open rowboats. They approached a whale closely so as not to miss with a toothpick-like harpoon. At least when comparing it with the bulk of a seventy foot long leviathan sperm whale. And the Kings of the Sea didn't take kindly to being hunted, giving rise to the shanty of the harpooner: A Dead Whale or a Stove Boat.The whaleboat rode the waves like an albatross. For lightness, grace and speed it simply had no peer. The buckets held up to a mile of line. The harpooner would stand on the stern holding his harpoon. A successful throw might mean a long chase, the whale taking the boat in tow. The harpoon line would be belayed on a single pollard on the deck. The double ends made it easy to move in two directions, a slap of the tail of an angry whale had better be avoided. Our hand built whaleboat is built lapstrake planks-on-frame.
Whaling tools in amazing detail.

photos and text courtesy Mallcarts





"Thar she blows!" The hard men of the sea take to their boats in pursuit of the gentle giants of the ocean.

photos and text courtesy The Miniatures Page






Nautical dioramas, This whale boat is completely outfitted with whaling tools of exceptional detail, including harpoons, hooks, daggers, flensing knives, gaffs, etc. The hull is crafted of individual ivory "planks". This is a six-man, single mast whaleboat. It would have been one of four carried on a whaling ship. Its crew would have included a coxswain, four rowers, and a harpooner up front. The model has been mounted in a fine mahogany and brass case. Boat measures 10 and one quarter inches long by 2 and three quarters inches wide by 2 and one quarter inches high. Case / Mount: 13 and one half inches long by 6 and one half inches wide by 5 and three quarter inches high.

photos and text courtesy One Of A Kind Antiques





While we're waiting for the whaleboat builds to begin I thought it might be nice to look at some whaleboats. I didn't find a lot to show on the internet, but I did find lots of material relating to models of whaleboats, apparently in far greater abundance than the real thing. Not surprising given that your average whaleboat had a life expectancy of about three years. Lightly built and put to hard use, the boats were soon discarded and replaced. Which no doubt kept their builders happy. Wendy Byar actually spurred me into action when she put a post on FB of a model. I had been looking at them, but then it clicked.
N Roger Cole built the model at the top of the post. He's a meticulous craftsman based in Canada and does his research. I believe his model is built to the same plans that our boats will be. There's an extensive bio on him here. For the other models I have supplied what information was available. Hope this will serve as an appetizer prior to getting to the main course.